Friday, January 11, 2013

Kathy Orta December Daily Reworked - C6 size

I just love, love, love Kathy Orta's patterns (if you are familiar with her videos you will know she uses the phrase 'love, love, love' quite a bit), so when she published her free December Daily mini album I couldn't resist making one of my own.

If you want to watch the preview of her album you can view it on You Tube here.
The envelope and card kits she uses come from Michael's.  The cards measure 5" x 6 1/2", with the matching envelope measuring 7 1/4" x 5 1/4".  These are not available in Australia, and the closest we can get is the C6 card size which measures 105mm x 150mm (pretty close to 4 1/8" x 5 7/8") with the matching envelope measuring  4 1/2" x 6 5/16".  As you can see that is a sizable difference, which if course is going to mean an adjustment throughout to many of the measurements.

So this post follows Kathy Orta's instructions but converting them down to a C6 size for those of us who can only get access to that.  I am sure you are all capable of doing this without someone telling you how, this is mostly so when I make another one (and I plan to make several), I have all the measurements recorded.  

This mini will be smaller than the original so on most pages and page inserts it won't take a standard 4" x 6" photo, but it will take the 3.5" x 5" print which is the next size down.  Of course you can always custom size and crop your own photos according to your own needs, but the 3.5" x 5" (or 9 x 13cm) print size option should be readily available worldwide in any photo store.  You can, however, put a simple mat on as many of the pages as you want, which will (just) take a 4" x 6" photo.

December Daily Reworked  

December Daily Part One

You can watch Kathy Orta's original video on how to make part one of the December Daily here.  Watching her video is essential for understanding how the album is constructed, I am merely giving my measurements for using a smaller C6 size envelope and card.

Card Page One

The measurements for this page remained the same as the original.  Go ahead and make the cuts at 2"and trim down to 3".  Trim the corners as desired.  Adhere together as shown and then trim off 1/2" off the side that doesn't have flaps.  Your card should measure 3 5/8" across.  This gives room for the hidden hinge binding and still allows your card to fit in nice and flush.

Card Page Two

Trim the card at 1/2" to the right hand side of the scored edge.  Keep the piece you trimmed off and put it aside to make a pocket later.

Envelope Page One

Go ahead and seal the envelope as instructed.  Trim a sliver off one end, and then trim the other end so that the envelope measures 4 1/8" across (the same width as the card).

Envelope Page Two

Adhere the flap of your second envelope to the first envelope page as instructed.  Trim the second envelope so that it too measures 4 1/8" across.

Pocket One

Take the extra piece you trimmed away while making the second card page and trim it so it measures 5 1/8" along the long edge.  When directed, score each edge at 1/2" and adhere as shown to create the pocket.  This creates a pocket 4 1/8" wide (same width as the card) and 3 5/8" high

Twin Pocket (Variation)

I felt that given the reduced overall size of the album that the twin pockets were a bit too small to have any practical function, so I adjusted it to make one large side loading pocket.  I wanted a pocket that measured 6 1/4" x 2 1/4", so I cut a piece of cardstock at 7 1/4" x 2 3/4" and scored at 1/2" on three sides.

December Daily Reworked  

December Daily Part Two


You can watch Kathy Orta's original video for part two of the December Daily here.  Watching her video is essential for understanding how the album is constructed, I am merely giving my measurements for using a smaller C6 size envelope and card.

The Envelope Pages

Adhere the two envelopes together as shown.  Place envelopes into your paper trimmer and line up so the edge of the envelope is just a smidge over the 5" marker (this is where Kathy lines hers up to the 5 3/4" mark).  This should place the fold line for the envelope flap directly on the half inch marker, giving you a half inch flap when you trim.

In the original version the envelopes are then folded in on each other, and the top facing envelope is trimmed down to 4" in width. This is a reduction of 1 1/4".   We are actually going to trim off an extra 1/8" so that when our pages are all folded there is an even 1/2" spacing between the three pages.  So we are going to trim off 1 3/8".  You don't have to, you can keep the original measurement, but I am a kook for symmetry.

Slide the envelope into the trimmer so the bottom facing envelope is being cut and trim so that it is 4 1/8" wide.

The Middle Card Pocket

The original directions tell you to trim off 1/2" off one side, do this by lining up your card fold at the 3 5/8" mark.  Score and assemble as directed.  To attach this page to the envelope pages measure 5 3/8" up from the bottom (instead of the 6" in the original instructions).

The First Pocket

On the inside of the first page is a pocket, the original measures 5" x 5".  Ours will measure a scant 4 1/16" x 3 1/2".  Score on three sides at 1/2" and assemble.

Back Page Pocket

Cut one card in half as directed.  Trim the long side of this piece to generous 5 1/6".  Score at 1/2" on three sides and form a pocket.

Belly Band

For the belly band on the back of the middle page, take the bottom flap that you cut off to make the middle card pocket and score it at 1/4" at each end.

December Daily Reworked
To show you just how versatile this album is, I constructed one that was only three pages .

December Daily Part Three

You can watch Kathy Orta's original video for part three of the December Daily here.  Watching her video is essential for understanding how the album is constructed, I am merely giving my measurements for using a smaller C6 size envelope and card.

First Envelope Page

Adhere the two flaps together as shown.  Trim envelopes down to 4 1/8".  Trim the excess off the flaps so it measures 1/2".

Envelope Half Pages

Seal the envelope as directed. Fold in half and trim along fold line.  Trim a sliver off the closed end of each envelope half, which should make your envelope halves now 3 1/8" wide.

Assembling the two parts

Make a snip in the excess flap as shown at the halfway mark, which will be approx 3 3/16" (this measurement doesn't need to be precise).  Attach the two half pages as shown.

Front Page Pocket/Sleeve (to insert the hidden hinge)

Cut a piece of pattern paper 3" x 7 1/4".  Score half each at each short end and attach as shown.

Pocket on Inner Page

Cut a piece of cardstock 5 1/2" x 5 1/6".  Score at 1/2" on 3 sides and fold to form pocket.  Attach as shown.  As this album is smaller than the original, and it already has so many pockets, I chose to omit the pocket here and simply mat with a piece of card cut at 6 1/4" x 4".  This will allow me to put in a slightly trimmed 6" x 4" photo.

December Daily Hidden Hinge Binding Strip

You can watch Kathy Orta's original video on how to make the hidden hinge part of the December Daily here.  Watching her video is essential for understanding how the album is constructed, I am merely giving my measurements for using a smaller C6 size envelope and card.

The only measurement here that is different is the height of the binding strip, which will be 6 1/4".

December Daily Reworked

December Daily Album Cover

You can watch Kathy Orta's original video on how to make the album cover of the December Daily here.  Watching her video is essential for understanding how the album is constructed, I am merely giving my measurements for using a smaller C6 size envelope and card.

There are three parts to the album cover... the back panel, the front panels and the side spines.

The original back panel is cut at 7 3/4" x 7 3/4" which works out to be 1/2" taller than the envelope used in the original.  We can keep the same proportions.  Our envelopes measure 4 1/2" x 6 5/16".  Because this is the cover and 1/6" of an inch extra to the height of this album won't make any difference we are going to round these proportions up to 4 1/2" x 6 3/8".  So we will cut our back panel piece to measure 6 7/8" x 6 7/8".

The original album front panel cover pieces are cut at 7 3/4" x 6" which works out to be 1/2" taller than the envelope and 3/4" wider than the original envelope.  Once again we can keep these same proportions and cut two panels that measure 5" x 6 7/8".

The original side spine panel pieces measure 7 3/4" x 2".  Ours will measure 6 7/8" x 2".


December Daily Album Cover - My Version

The original album cover is done in such a way that the pages interleave.  I think this creates excess bulk in the centre of the album, we have six pages evenly spaced at either end, but in the centre those six pages overlap creating the bulk of 12 pages.  Depending on how you load your pages this can create too much bulk in the centre, so I widened the cover to allow the pages to sit next to each other, rather than on top of each other.

There are three parts to the album cover... the back panel, the front panels and the side spines.

The original back panel is cut at 7 3/4" x 7 3/4" which works out to be 1/2" taller than the envelope used in the original.  By increasing the width an extra inch to 8 3/4" this allows our finished pages (which measure 4 1/4" each, to sit side by side without overlap.  So for my version I cut the back panel piece to measure 6 7/8" x 8 3/4" (this is an inch wider than the original width).

To compensate for the extra inch width to the back cover, we will add an extra half inch to each front flap, cutting two pieces at 6 7/8 x 5 1/2".

The original side spine panel pieces measure 7 3/4" x 2".  Ours will measure 6 7/8" x 2".

Tuesday, January 8, 2013

Gypsy Caravan, Christmas Style

Gypsy Caravan Christmas Version
Caravan front.

I am totally in love with this project.  The concept is just fabulous, and open to so many different style interpretations.  The pattern is called Gypsy Caravan by Laura Denison of Following The Paper Trail.


Gypsy Caravan Christmas Version
Caravan side, with the shutters closed.

This is just my practice project, one I 'whipped' up to make sure the instructions and pattern was accurate, before using my good paper.  I am glad I did too, because the instructions are at times a little mysterious, which is helped somewhat by watching the Ustream videos, but even then I threw out the first attempt because one of the measurements were incorrect and you weren't advised until the second video that this was the case, at which point it was easier to just ditch the one I had made and start again.  There are also instructions not included in the downloadable pattern that she goes through on the video, so be prepared.  If you want to make this project I strongly urge you to sit through all the videos before you start construction.

 
Gypsy Caravan Christmas Version
Caravan side, with the shutters open showing the cubby space.

I buy my chipboard in 30" x 17" sheets, and this used almost a full sheet to put together.  The paper range I used is by Jodie Lee called Father Christmas Papers which you can still find in scrapbook stores printed under the Pink Paislee label, or you can download it digitally from Jessica Sprague. That is exactly what I did, and then printed it out on matte photo paper using my inkjet.


Gypsy Caravan Christmas Version
Caravan rear, with shuttes and drawer closed.


The pattern comes with instructions to make a mini album to fit in the trunk of the caravan, but I wanted something simpler and quicker to make, and also something that would suit anyone, not just photo enthusiasts.  So I whipped up a little drawer that fits in that space which could hold all manner of doo-dads.  Notice it's a wee bit wonky?  That's why I do a test run, it lets me see what fits and what doesn't, so when I do a 'proper' one I am aware of any issues before hand.


Gypsy Caravan Christmas Version
Caravan rear, with shutters and drawer open.
 

The fabric trims and buttons I bought in 2011 in a clearance sale at Spotlight(Australia's poor cousin to Joann's or Michael's).  I liked them so much I held onto them and held on to them waiting for that special project... sound familiar?  Aside from the fabric trims I haven't added any embellishments.  As this was a practice project I think I will probably donate it to my son's school for a raffle, or donate it to the local hospital or something like that, and let the recipient fill it with goodies and add any extras.

Linking up with the following blogs:

Make it Monday:  Always Anything Goes
Use it Tuesday:  Make It Sparkle (gold tinsel on buttons and trim)
Inky Chicks:  Anything Goes
Shopping Our Stash:  Use Your Old Buttons (buttons as hub caps on wheels)
Through the Craft Room Door:  Anything Goes
Simon Says Stamp & Show:  Embrace the Old (used up hoarded trims and buttons)


Sunday, January 6, 2013

Well Hello Little One

Welcome JJ 

My best friend has had his first child, a son, little JJ.  He was born a healthy 8lb on the 5th January 2013.  I had already made a substantial gift for him (which you can see here), but I wanted a small token to take with me when I went to visit for the first time in hospital.

I used a left over sheet from the same paper collection for this hanging frame that I used for the baby blocks, so it will co-ordinate nicely in his room.  His Mum is a lover of lady bugs, so the cute little darling from Mo Manning was perfect.

He is coloured with Prismacolor pencils on Kraft, and matted with Duck Egg Blue card by Kaisercraft and some left over from the Little Darlings by G45, with a liberal dash of Stormy Sky Distress Ink, which thankfully hides all manner of flaws!

Linking this up with Mo's Challenge Blog, the flavour this week is Anything Goes.
Also linking up with the fab crew at Make it Monday, where it's always Anything Goes.