Jack Skellington Part 2

Technique: Freehand Drawing

Materials
white acrylic paint
glass bauble
Bic Mark It pens

Add a little water to the white paint until it is the consistency of pouring cream. Pour into the bauble and swirl around to coat the inside fully and then tip upside down and drain. I have a little lab beaker that I use for this, works a treat!

Draw Jack's details onto the bauble with a black permanent marker. If you make a mistake simply dip an orange stick or toothpick into some isopropyl alcohol and rub away the boo boo. This is the second in a series of Nightmare Before Christmas Ornaments.

Pine Cone Ornament

Technique: Basic Crafting

Materials:
pine cone
embellishments
glue

Tools:
hot glue gun

This is another ornament where I pulled embellishments from broken or trashy Christmas ornaments and used them to make a new, improved version. There really isn't much to this ornament, simply get a pine cone of a size that you like and to the top hot glue some ribbon and any other embellishments that you like.

Recycled Ribbon Spool

Technique: General Crafting

Materials:
empty ribbon spool
music print paper or fabric
miniature musical instrument
ribbon
glue

Tools:
hot glue gun

This ornament was made from the plastic spool that ribbon was wound around, combined with a piece of a broken christmas ornament. Cover both sides of the spool with paper or fabric, on mine I used fabric. Wrap ribbon around the cardboard centre of the spool to cover and add decorative bows and a hanging loop. Hot glue embellishments into place.

Catching up with Steamed Glass

Once a week I spend the day playing catch up, adding the finishing touches to any projects not quite yet done, taking photos and browsing the net for inspiration, and as always, looking for free patterns and interesting tutorials. To stick to my commitment to posting daily, I'll share with you something that I thought was a fabulous find.

As I was researching how to hollow out a lightbulb I came across this amazing light bulb by Etsy seller Steamed Glass.

Everything about this delights me, the blend of organic and technical, science and magic, it's fabulous in some many ways.  It's another of those beautiful things that would just gather dust in my house, but for those of you who are inspired, the following tutorial video is a great source of knowledge and inspiration.

Six Inch Crochet Blanket Sampler - Lacy Cross

Technique: Crochet

Materials:
8 ply yarn in 3 colours

Tools:
4mm crochet hook

Finished Size:
6 inches


The original pattern comes from the book 200 Square Crochet Blocks by Jan Eaton.

Vintage Music Ornament

Technique: Paper Mache

Materials:
Liquitex Gloss Medium & Varnish
sheet music (see below)
styrofoam ball
cord and trim
painting sponge

Tools:
scissors

Vintage is the hot catch word when it comes to decorating, but it's not hard to make something new look old. The Duke University Library has an excellent collection of vintage sheet music here.

I used Ave Maria.

Tear the music into small pieces, about half an inch squares. Using the Liquitex to both glue and seal, cover the entire ball and allow to dry. Give a second coat of sealer and allow that to dry. Rub a generous amount of gold paint over the entire ball with the sponge to 'age' and then wipe off any excess. This gives the ball a lovely golden look. Pin or glue trim and hanger into place.

Painting The Roses Red

Technique: Paper and String

Materials:
an old novel
thin beading wire
acrylic paint
matt spray sealer
hot glue
bamboo skewer
string

Tools:
scissors
paintbrush
wire cutters
hot glue gun

There are plenty of ways to make paper roses, a google search will even pop up with several videos. The way I made mine was a hybrid from floral artistry, first using wires to attach to the petals and leaves, and then using the wires to attach to and form the stem.

Stack five pages from the novel together and cut out 4-6 different size petals. You can do this free form without the need for a template and you will have a more natural looking flower. Start with a small teardrop shape, about the size of the fingernail on your ring finger and work up to larger almost heart shape petals. You will need about 20-25 shapes, depending on how big you want your bloom to be. Cut 2 - 3 leaf shapes as well. Cut one strip of paper about 6 inches long and half an inch wide and fold this in half so it is 6 inches long and one quarter of an inch wide.

Cut 20 or so pieces of beading wire, about twice the length of your index finger, and then fold them over in half so that they are the length of your index finger with a small loop at one end, and the two cut ends at the other. Use small dots of hot glue to attach to the pointy end of the petals.

Using red acrylic paint, colour 2 or 3 petals from each size, so that about one third of your petals are painted red and allow to dry before proceeding.

Put a dab of hot glue on the end of your skewer and attach one end of the long strip you cut, you are attaching the short end in such a manner that the folded edge is facing up and away from the tip of the skewer. Wind it around the skewer to form the inner bud of the rose. Secure with hot glue.

You should now have a skewer with a small spiral of paper stuck at one end, this will act as the foundation for wiring all of your other petals. One petal at a time, hold in place with your fingers until you have the position you desire, then twist the wire around the skewer to secure. Continue in this manner from small petal to large until your blossom is the size you require. Wire two or three leaves into position.

Cut the bamboo skewer and any long wires so that your stem is around 3 - 4 inches in length. Securing with hot glue, wrap string around the stem to cover the wires and give a nice finish. You could use green florists tape here, or ribbon, if you preferred, but I wanted to keep with the paper and string theme.

Primitive Plum Pudding

Technique: No Sew Fabric

Materials:
styrofoam ball
unbleached calico
acrylic paints
string
cinnamon powder

Tools:
pinkingshears or regular fabric scissors
painting sponge or brushes
printer
dusting brush, or a cosmetic blusher brush
hole punch

Cut a small slice from the styrofoam ball so that it has a flat bottom. Cut a circle from the unbleached calico large enough to cover the ball and be tied at the top. I used a dinner plate as a template for mine. Gather and tie off with string.

Using the dusting brush, dust the ornament with cinnamon. Not only does this give it a gorgeous smell but it gives it that aged, primitive appearance. Cut two holly leaf shapes from the calico and paint them green and set aside to dry.

Print the two images below and glue back to back to make a double sided hang tag. Age the holly and the card with cinnamon. Make holes in the holly and tag with a hole punch and tie to the pudding with the string.

Queen Bee Lightbulb Ornament

Technique: Recycled, General Crafting

Materials:
screw in candelabra light bulb, cleaned out
black and yellow chenille sticks
little bees (mine were made from ribbon)
hot glue
styrofoam ball & paperclay (or large wooden bead)
acrylic paints
glass and tile medium
masking tape
cake decorating stamens
raffia
spray varnish or sealant

Tools:
hot glue gun

Abdomen: Using masking tape create a stripe in the middle of the lightbulb. Following the manufacturer's directions, mix some yellow paint with glass and tile medium and paint the stripe. Allow to dry thoroughly. Apply the little bee's using hot glue.

Thorax: Determine which side of the abdomen is your best side, so that you know which will be your back. Starting at the back wind black and yellow chenille sticks around the screw in part of the globe, securing with hot glue as necessary.

Arms: Find the centre of a yellow chenille stick and fold the ends in towards that. Leave about 1/4" of yellow free at each end (for hands) and wrap the remainder in black chenille, you will most likely need to use two sticks to fully cover the arms. Bend at the elbows and glue into position at the back.

Head: You can get wooden beads that are specifically designed for using as heads on clothespin dolls, but here in Australia they are proving very difficult to source. I have had to become very creative! If you can get those beads, then they are the perfect size, go ahead and use those. If you can't get them, you can use either a small styrofoam ball just as it is, or cover it with a thin layer of paperclay like I did. I prefer the paperclay coating to the plain styrofoam ball because it's a nicer surface to paint on, but do whatever works for you. DO NOT cover a styrofoam ball with polymer clay, the baking process will release toxic fumes from the foam, always use paperclay when using foam.

Give your head 2-3 coats of yellow paint, drying between coats. Paint on details of face, spray with clear sealant or varnish and then wrap black chenille around the rest of the head, using hot glue to secure where necessary. Use stamens or bits of chenille as antennae.

Finishing: Glue head into position on top of the lightbulb. Make a bow out of the raffia and glue onto the back of the bee for wings. Give your bee a little heart to hold. If desired, you can write a cute little phrase on the heart such as "Bee Mine!"

Pisces Kimekomi Ball

Technique: Kimekomi (Or New Sew Fabric)

Materials:
styrofoam ball
fabric
cord, braid etc
paper
piece of string

Tools:
orange stick (cuticle stick)
scissors
ruler
scalpel
compass

Long before it had the name Kimekomi, I had seen fabric Christmas ornaments at fetes and fairs. Now that it has the name Kimekomi there are of course specialized tools you can buy, but it's not necessary at all.

Firstly, wrap a piece of string around the middle of your styrofoam ball to measure the circumference. Whatever length it is, divide that by six, and mark that on your string. Your ball should have a mould line, a straight line around the circumference. Using the string, mark the 6 segments around the mould line.

There are lots of tutorial videos to show you how to segment Kimekomi balls, this is just how I do it. Using your string, make marks around the ball, then with a pencil, join opposite marks, like a dot to dot around a ball. This should create six evenly spaced segments around the ball, like an orange.

Set your compass to the same width as the segments, and starting at lines that intersect begin drawing circles around your ball. Rather than give you a specific pattern direction, I encourage you to draw circles on the ball until you find a pattern you are happy with.  The larger the pattern segments the easier the ball will be to construct, so bear that in mind. I will often have many circles overlapping before I find a pattern that repeats that I like.  When I did find the pattern I wanted, I outlined the score lines in red, so that it was clear which lines I needed to score.

Score each of these lines lightly with a scalpel, you want to cut down about 1/4" of an inch.

Start with one colour of fabric and cut a piece that is going to be just a bit larger than the segment you wish to cover (you can trim this as you tuck so its better to be generous than skimpy here). Hold firmly in the centre of the fabric and using the cuticle stick, tuck one edge into the groove, and then the other, working each side evenly so that the fabric remains true and doesn't distort and end up uneven. Tuck the points in and trim any excess fabric if necessary. Continue in this manner until all six wedges of fabric have been used.

Chose a cord or braid that compliments your fabric. If using a thin cord this will sit neatly into the channels, and the ends will tuck into the ball nicely. Braid is thicker and will sit over the channel, you can use glue or decorative pins to secure this in place. The same process applies to the hanger. You can push some cord into the top of the ornament with a skewer, or use a decorative pin to secure a loop of braid to the top.

Catching up with Magic Mushrooms!

Once a week I spend the day playing catch up, adding the finishing touches to any projects not quite yet done, taking photos and browsing the net for inspiration, and as always, looking for free patterns and interesting tutorials. To stick to my commitment to posting daily, I'll share with you something that I thought was a fabulous find.

 I love mushrooms, always have.  Even as a kid I would hire books from the library on mushroom types, with a particular fondness for the fly agaric species.

I think it is because mushrooms feature so frequently in fairy tales, and in art wherever there is a mushroom there is a fae somewhere nearby.

The following mushrooms can be knitted using the free pattern from Kathryn Ivy.

Cinnamon Anise Cluster

Technique: Basic Crafting

Materials:
cinnamon sticks
star anise
raffia
hot glue
rubber band

Tools:
hot glue gun

A classic country style ornament, made in many kitchens over the holidays in dozens of different variations. They are easy to make, the ingredients are easy to get, they fill the home with a beautiful scent and add a simple, rustic appearance to any kitchen or tree.

To make, bind three or four cinnamonsticks together with a rubber band. Wrap raffia around the band to hide and tie to form a bow. With hot glue, attach 2 or 3 star anise buds. Attach a loop off raffia to hang.

You could embellish with ribbon instead of raffia, use nutmeg instead of star anise, or add dried orange or apple slices.

Rose Petal Sachet

Technique: General Crafting

Materials:
30cm circle of tulle
dried rose petals
rubber band
ribbon
silk or dried rose buds

Tools:
Scissors

A very pretty, and fragrant, ornament that can be hung to add a touch of romance and elegance to a room. Coupled with a vial of rose fragrant oil, it makes a lovely gift.

Lay the circle of tulle on a flat surface and place a handful of rose petals in the centre. Draw up the edges firmly around the petals and secure with a rubber band. Decorate with ribbon, silk or dried roses, baby's breath, whatever takes your fancy.

Wedding Corset

Technique: Sewing

Materials
base fabric of choice
ribbon, lace, trims
tacky glue
filling (either polyfill or herbal)

Tools:
sewing machine
scissors


Many of the materials I used in this corset were remnants from my wedding dress (yes I wore pink).



With the base fabric right sides together, use template above to cut out two pieces.

Cut two lengths of ribbon about four inches in length. Fold and pin into place upside down on the right side, bottom edge of the corset to act as the garter straps. It's kind of hard to explain if you have no sewing experience, the folded edge of the ribbon will be flush with the bottom edge of the corset and the cut edges will be pointing up towards the bra section, so that when you sandwich it back together you will sew over the top of it and catch it in the seam to secure it. Then when you turn it right way out, the two garter straps will be danging down.

Cut a six inch length of ribbon and pin each cut end to a bra cup, loop pointing down, so that when turned right way out it acts as a hanging loop.

Place the other pattern piece, right sides together, over the top and pin into place being sure that the loose ends of the ribbons are not caught in the seams.

Sew, leaving an inch gap at the bottom. Clip curves, turn and stuff. You can stuff with herbs like lavender for a scented corset you can hang in your wardrobe, or use polyfill. Whipstitch bottom gap closed.

OK dull part over, fun part begins! Using tacky glue you can decorate your corset in any way you like. I added some feather boa at the bottom, and found two "buckles" to attach to the ribbons as garter clasps. Hand died lace and gimp braid added the finishing touches.

The Love Bug

MATERIALS:
Small amounts of 8 ply yarn in pink and red
4 mm Crochet Hook (US G/6)
2 Safety eyes or buttons for eyes
Small amount of red felt
1 red pipe cleaner
Nylon stocking
Polyfill stuffing
PVC Pellets or other plastic beads
Craft Glue
Black thread (either regular or preferably, embroidery)

Tools:
Sewing needle

Happy Valentines Day!

This was not at all the project I had planned for today, but the crochet bug has well and truly bitten me, and this love bug was too adorable I couldn't resist.

The original pattern can be found here, and downloaded in PDF format if you prefer.

GAUGE AND FINISHED SIZE: Gauge is not important. Just make sure you make it tight enough so the stuffing doesn’t poke or show through. The Love Bug is about 4 inches tall when complete, not including his love-antennae.


ABBREVIATIONS:
“in loop” = in the adjustable ring
sc = single crochet
dc = double crochet
sl st = slip stitch
st or sts = stitche(s)
sc2tog (sc decrease)= Insert hook into st and draw up a loop. Insert hook into next st and draw up a loop. Yarn over, draw through all 3 loops on hook.
Invdec (invisible decrease) = Like a regular decrease (sc2tog), but work through the front loops only: Insert hook into front loop only of next stitch and draw up a loop. Insert hook into front loop only of next stitch and draw up a loop. Yarn over and pull through all 3 loops on hook. Makes your decreases prettier.

All rounds are worked continuously in a spiral; do not join or turn at the end of rows.


HEAD:

First, cut 2 small hearts out of the red felt. Poke a little hole in the center to push the safety eye through when ready to attach.

Start with an adjustable loop
Round 1: 6 sc in loop
Round 2: 2 sc in each sc around - 12 scs
Round 3: *2 sc in next sc, 1 sc in next sc; repeat from * around - 18 scs
Round 4: *2 sc in next sc, 1 sc in each of the next 2 sc; repeat from * around - 24 scs
Round 5: *2 sc in next sc, 1 sc in each of the next 3 sc; repeat from * around - 30 scs
Round 6: Work 4 rows even (Sc in each sc around)
Round 7: *Invdec or sc2tog, sc in next 3 sc; rep from * around - 24 sc.
Round 8: * Invdec or sc2tog, sc in next 2 sc; rep from * around - 18 sc.
At this point, attach safety eyes to head through center of each felt heart. Embroider eyelashes on. Stuff head with polyfill stuffing.
Round 9: * Invdec or sc2tog, sc in next sc; rep from * around - 12 sc.
Round 10: (Invdec or sc2tog) around - 6 sc.
Fasten off, leaving a long tail. Using a needle, weave the tail through front loops of the last round and pull tightly. Knot to secure. Weave in ends.


BODY:

With Pink, make an adjustable loop
Round 1: 6 sc in loop
Round 2: 2 sc in each sc around - 12 scs
Round 3: *2 sc in next sc, 1 sc in next sc; repeat from * around - 18 scs
Round 4: *2 sc in next sc, 1 sc in each of the next 2 sc; repeat from * around - 24 scs
Round 5: Work 2 rows even (sc in each sc around)
Round 6: Change to Red, * Invdec or sc2tog, sc in next 2 sc; rep from * around - 18 sc.
Round 7: Work 1 row even (sc in each sc around)
Round 8: Change to Pink, work 1 row even (sc in each sc around)
Round 9: Change to Red, work 1 row even (sc in each sc around)
Round 10: Work this row even (sc in each sc around)
Round 11: Change back to Pink, work 2 Invdec or sc2tog over next 4 sc, sc in each of the next 10 sc, work 2 Invdec or sc2tog over next 4 sc – 14 sc
Round 12: Work this row even (sc in each sc around)
Round 13: Invdec or sc2tog, sc in each of the next 8 sc, invdec or sc2tog – 12 sc
Round 14: Work this row even (sc in each sc around)
Fasten off, leaving a yarn-tail long enough to sew body to head.

To stuff the body: Push the nylon stocking into the body so that the opening is matched up with the opening of the body. Fill with the pvc pellets or plastic beads to about halfway up the body. This gives it a bit of weight at the bottom so it doesn’t keep falling over due to his big head. Knot the nylon and cut off any excess. Stuff the rest of the body with polyfill stuffing.

HEART SHAPED WINGS:
(Make 2)

With Red, make adjustable loop
Round 1: 6 sc in loop, sl st to join

Round 1: Ch 4 (counts as 1dc), 3 dc in sl st, dc in next sc, 4 dc in next sc, sc in next sc, 4 dc in next sc, dc in next sc, 2 dc in the sl st that joined, sl st in 4th ch of ch 4, ch 1.

Round 2: sc in 4th ch of ch-4, sc in each of next 4 dc, 2 sc in next dc, 3 sc in next dc, 2 sc in next dc, sc in next dc, sl st in next sc, sc in next dc, 2 sc in next dc, 3 sc in next dc, 2 sc in next dc, sc in each of next 3 dc, 2 sc in sl st, join.

Fasten off leaving a yarn-tail long enough to sew wings to body.


ASSEMBLING:
Sew head to body. Sew wings to body.
Cut the pipe cleaner in 2 pieces and shape a heart on one end. Cut other end to desired length and poke into his little head. Add some dabs of glue to hold them in place.

Hugs Given Here

Technique: Plastic Canvas

Materials:
8-12 ply wool in various colours
curly hair
gold chenille stick
hot glue

Tools:
scissors
hot glue gun

A favourite of my son's who absolutely adores his hugs! He says I should hang it above my chair.

The original pattern was designed by Susan Leinberger, and can be downloaded from www.freepatterns.com. Membership is required, but it is free, and it's a great resource! Once a member you can download the entire PDF directly from this link.

If you are like me, and prefer to adapt as you go, then the following pattern will be enough of a guide for you. For my version I substituted one of the shades of red for pink, I changed the bow to a halo and I didn't add the eyes because I liked the way it looked with just the lashes.

Recycled Valentines Ornament

Technique: Recycled Craft

Materials:
tin can
old valentines card
roses and ribbon
eyelets
Dremel Tool (or nail and hammer)

Tools:
scissors
hole punch and eyelet setter
safety can opener

What a lovely and eco-friendly ornament!

Take the top off a large tin can, I used an 800g tin of peaches. It is important to use a safety opener so that the lid has no sharp edges. Use this to draw a circle on the valentines card and cut it to fit.

Put a hole in the top of the lid for the hanger, and two holes in the bottom. Use what you have, I used a Dremel tool, but you could punch a hole through using a hammer and nail. Put matching holes in the card using the hole punch and place eyelets.

Decorate with ribbon, silk roses or any embellishments that you feel match the card.

Catching up with Kaisercraft

Once a week I spend the day playing catch up, adding the finishing touches to any projects not quite yet done, taking photos and browsing the net for inspiration, and as always, looking for free patterns and interesting tutorials. To stick to my commitment to posting daily, I'll share with you something that I thought was a fabulous find.

If you have walked into any craft store you have seen products by KaiserCraft who have a huge range of scrapbooking supplies.  You can find the PDF file for this adorable little mini heart bag here.  The PDF includes a full size template to print, and step by step instructions for assembly.

Six Inch Crochet Blanket Sampler - Traditional Granny

Technique: Crochet

Materials:
8 ply (sports or medium weight) yarn of choice

Tools:
4mm hook

Finished Size:
6 inches

I was taught to do the basic granny square when I was quite young. Of course after not doing any crochet for years I totally forgot how to do one again, but it is one of the most basic crochet patterns and easily picked up again.

The great thing about the granny square is that you can finish one off pretty quickly, and they are very portable making it ideal as a travel project.  Throughout the year I will be doing sampler squares for different granny squares and then constructing them together in one throw.

The written pattern for a granny square makes it looks a lot more complicated than it is.  The granny is a simple round of three double crochet shells separated by two chains at corners, and one chain on straights.

Join with slip stitch unless otherwise noted.  Chain 2 at the beginning of each row or round counts as first DC.

Foundation Ring:  Ch4, slp st into first chain to form a ring, ch 2 (counts as first dc), 2 dc in ring, [ch 2, 3 dc in ring] 3 times, ch 2, join

Rnd 1:  Slp st in each of next 2 dc, slp st in next chain space, ch 2, (2 dc, ch 2, 3 dc) in same ch space, ch 1, [(3dc, ch 2, 3 dc) in next ch sp, ch 1] around, join in second ch of beginning ch 2.

Rnd 2:  Slp st in each of next 2 dc, slp st in next chain space, ch 2, (2 dc, ch 2, 3 dc) in same ch space, *ch 1, 3 dc in next ch 1 sp, ch 1 **, (3dc, ch 2, 3 dc) in next ch 2 sp, rep from * around ending last repeat at **, join in second ch of beginning ch 2.

Rnd 3: Slp st in each of next 2 dc, slp st in next chain space, ch 2, (2 dc, ch 2, 3 dc) in same ch space, ch 1, *[3 dc in next ch 1 sp, ch 1} twice**, (3dc, ch 2, 3 dc) in next ch 2 sp, ch 1, rep from * around ending last repeat at **, join in second ch of beginning ch 2.

 Rnd 4: Slp st in each of next 2 dc, slp st in next chain space, ch 2, (2 dc, ch 2, 3 dc) in same ch space, ch 1, *[3 dc in next ch 1 sp, ch 1} three times**, (3dc, ch 2, 3 dc) in next ch 2 sp, ch 1, rep from * around ending last repeat at **, join in second ch of beginning ch 2.

Rnd 5: Slp st in each of next 2 dc, slp st in next chain space, ch 2, (2 dc, ch 2, 3 dc) in same ch space, ch 1, *[3 dc in next ch 1 sp, ch 1} four times times**, (3dc, ch 2, 3 dc) in next ch 2 sp, ch 1, rep from * around ending last repeat at **, join in second ch of beginning ch 2.

Continue adding rounds until the square is the desired size.

Paper Heart

Technique: Cut & Paste

Materials:
old book
paper clips

Tools:
stapler
ruler
craft knife or rotary cutter

This project is so simple it hardly needs a tutorial! I used an old romance novel, but you could use any paper you like.

Cut 11 strips of paper one inch wide and six inches long.

Fold one strip in half and using a hole punch, place a hole up near the folded edge, this is the hanging strip.

Take two strips and put them to one side, they will remain six inches long.

Crop 1/2 an inch off two strips, so they are 5 1/2 inches long.
Crop 1 inch off two strips, so they are 5 inches long.
Crop 1 1/2 inches off two strips, so they are 4 1/2 inches long.
Crop 2 inches off two strips, so they are 4 inches long.

Starting with one of the longest strips of paper and ending with the shortest, make two piles. Take one pile, and ensuring that all the short edges are flush with each other, paperclip it into position about 3/4" down from the folded edge of the hanging strip. Repeat with the other side.

Gather all the short ends and make them flush and paperclip into position at the bottom of the hanging strip, you should be able to see the heart shape forming now. Fiddle around with the paperclips until you have the shape that you want. Having the short edges further away from each other will give you a more elongated heart, bringing them closer together will give you a wider heart. When you are pleased with your shape, hold the sections in place with your fingers, remove the paperclips and staple to secure.

Loop some string through the punched hole on the hanging strip.

Green Dragon Herbal Tea

Technique: Herbcraft

A spicy blend that captures the essence of chinese green tea and mixes it with flavours of chai.

50g green tea
8g cardamom seeds
10g cinnamon sticks
5g dried ginger slices
5g cloves
2.5g whole black pepper

For those interested in herbal mythology and lore, all the ingredients have a fiery energy, which is where the name comes from.

To make, place the cinnamon sticks, ginger slices and pepper into a mortar and pestle and break down into small pieces. You don't want a powder, but you do want to break it down to a more manageable size. Combine with the green tea, cardamom and cloves and store in an airtight container. Use at a rate of one teaspoon per cup.  With traditional herbal teas you would not add milk, however as this has a green tea base, you can freely add milk and sugar to taste.

Chinese New Year Jacket

One of the Chinese New Year traditions is to create banners and write upon them symbols of luck, fortune, health, wealth or whatever else you would like to bring into your life in the new year. This cute little jacket incorporates four such symbols.

Technique: Plastic Canvas

Materials
worsted weight wool (8-12 ply)
7 count plastic canvas
bamboo skewer
wooden beads
felt
tacky glue

Tools
tapestry needle
scissors

Using the chart below as a guide, complete the jacket with continental stitch, overcasting edges in red. A line of backstitching in gold was done between the outer red border and the overcast edge.




I have drawn the symbols in gold on the chart to make the lines more visible, you could do them on the jacket in gold if you wish, or red as I did. This is what the symbols on the jacket represent:






Cut the bamboo skewer slightly wider than the jacket and glue wooden beads at each end. Using the metallic gold yarn and thread through one sleeve of the jacket from back to front, then tie around hanger, then form a loop, tie around hanger and then through the other jacket sleeve, front to back and tie off. Cut a square of felt slightly smaller than the back of the jacket and adhere to the back to finish.

Chinese New Year Bauble

Materials:
glass bauble
red joss paper
Liquitex Gloss Medium & Varnish

Tools:
scissors
kitchen sponge

Cut the joss paper into strips. The bauble I used was 3" in size, so I cut my strips 1" x 4", if you are using a smaller bauble cut your strips thinner to accomodate. Paint a strip of liquitex onto the glass and smooth down a strip of joss paper, using a clean and barely damp kitchen sponge to press down on the paper. This softens the paper and encourages the bond between the Liquitex and glass, which helps the paper form around the curve of the bauble.

Continue in this manner until the entire bauble has been covered with strips of joss paper. Allow to dry overnight. Give the entire bauble a coating of Liquitex to seal and varnish.

Chinese New Year Lantern

Techniques: Cut and Paste, Basic Crafting

Materials:
3" styrofoam ball
red and black joss paper, or similar
Liquitex Gloss Medium & Varnish
red fringe
pva glue
black gimp braid
15cm red cord

Tools:
paintbrush
kitchen sponge
hot glue gun

Cut the joss paper into 1/2" squares. Brush a small amount of Liquitex onto the styrofoam ball, place on a square of joss paper, brush over with paintbrush to smooth down. Repeat this over half the ball, overlapping squares randomly. Allow to dry for several hours and finish the remainder of the ball in the same manner. Once thoroughly dry give a finishing coat of Liquitex.

Take a 15 - 20cm piece of black gimp cord, place a dab of glue at one end and place the cut edges of the red cord in place so that it forms a loop (this is your hanger). Wrap the piece of braid tightly around the cord to form a roll. Secure the end with a dab of glue to prevent fraying and glue into place on the top of the ball.

Lay a 15cm - 20cm piece of red fringing flat on your workbench. Run a thin line of glue along the top edge and roll up tightly. Wrap a small piece of black gimp braid around the top edge of the fringe and glue to the bottom off the ball, being careful to make sure it is not offset to the top, but in line so that it hangs properly.

Catching up with The Graphics Fairy

Once a week I spend the day playing catch up, adding the finishing touches to any projects not quite yet done, taking photos and browsing the net for inspiration, and as always, looking for free patterns and interesting tutorials. To stick to my commitment to posting daily, I'll share with you something that I thought was a fabulous find.

The Graphics Fairy site contains over 2000 high quality, royalty free, vintage images for you to print and use on your projects.

There's way more ads on the site than I like, but it is a small price to pay for such a valuable resource. I especially love the labels category, with plenty of ready to print vintage labels as well as blank templates for making your own. Here's just a few to whet your appetite.

Year Of The Rabbit

February 3rd marks the beginning of the Chinese New Year in 2011. This is the Year of the Rabbit in the Chinese Zodiac providing the inspiration for this ornament, however you could make this with the animal that symbolizes your birth year if you prefer.

Techniques: Knotting, Cut and Paste

Materials:
paper mache luggage tag
red and black joss paper, or similar
white chipboard or thick card
acrylic paints
sealant, such as Liquitex or Royal Coat
pva glue
1/2 metre red cord
double sided mounting tape or foam
large bead

Tools:
scissors

Cover the paper mache tag with the red and black joss paper. Print the image below onto a piece of red paper. I had some scrapbooking paper that was slightly textured, red background with a brushed gold over the top, that was perfect for this project. Glue the image onto a piece of white chipboard and cut to size. Seal both the back and front.

The square good luck knot is deceptively easy to make, all you need is a little cord, a square of paper and some good instructions. This site http://www.chineseknotting.org/luck/howto4/ shows a step by step guide to tying this knot, and if you feel adventurous, there are several other tutorials for different knots.

Glue the knot to the tag with one loop pointing upwards for hanging, and the loose tails pointing straight down the middle of the tag. Using double sided mounting tape stick the rabbit to the centre of the tag. Thread the loose ends of the cord through the bead and knot securely. Pull the bead back down to cover the knot. Fray the loose ends of the cord so it looks like a tassel.

Crochet Over Glass Bauble

Technique:  Crochet

Materials:
metallic crochet thread
8cm bauble

Tools:
2mm hook

The crochet over glass baubles remind me a lot of fishing buoys.  Perhaps I will do a rustic one with string and embellish with shells and such.

The original pattern was created by Joy Prescott for a 2.5" glass ball, using size 10 crochet thread and a size 6 steel hook.  The balls I had were much bigger, so I adjusted the pattern somewhat, by using thicker thread and a larger needle, as well as adding in extra rows of the netting.  If you would like to view the original pattern you can download it for free it here.

Round 1:  Ch 4, form to join ring, ch 3, 11 dc in ring, join in 3rd ch of beg ch-3.

Round 2:  Ch 5, [dc in next dc, ch 2] rep around, join in 3rd ch of beg ch-5.

Round 3: Ch 1, sc in same st as joning, [3 dc in next ch-2 sp, sc in next dc] rep around, ending with 3 dc in next ch-2 sp, join in beg sc.

Round 4:  Sl st to centre dc of next dc group, ch 1, sc in same st, [ch 5, sc in centre dc of next dc group] rep around, ending with ch 5, join in beg sc.

Round 5:  Ch 1, sc in same st as joining, [7 dc in next ch-5 sp, sc in next sc] rep around, ending with 7 dc in next ch-5 sp, join in beg sc.

Round 6:  Sl st to centre dc of next dc group, ch 1, sc in same st, [ch 5, sc in centre dc of next dc group] rep around, ending with ch 5, join in beg sc.

Rounds 7 - 11:  Sl st to 3rd ch of ch-5, ch 1, sc in same st as joining, [ch5, sc in next ch-5 sp] rep aroujd, ending with ch 5, join in beg sc.

Insert glass ornament.

Round 12:  Sl st to 3rd chain of ch-5, ch 1, sc in same st as joining, ch 3, sc in next ch-5] rep around, ending with ch 3, join in beg sc.

Round 13:  Sl st in first 2 chs of next ch-3 sp, ch 1, sc in each ch-3 sp around, join in beg sc, fasten off.

Goddess Art Doll

Technique: Sewing, Painting

Materials:
plain muslin or calico
acrylic paints
polyester or wool stuffing
wool scraps

Tools:
sewing machine
needle and thread
sea sponge

Place your fabric so it is laying right sides together. Using the pattern, cut two pieces of cloth one quarter of an inch larger than the pattern (this is for the seam allowance). Stitch around leaving a one inch gap for stuffing. Turn right side out. Lightly stuff the head area, and then stitch around the outline for the head. Continue stuffing the rest of the body until desired firmness has been reached. Whipstitch the gap to enclose.

You now have a blank goddess doll that you can decorate for any season, any reason. For this doll I used a sea sponge to dapple rich brown, burgundy and gold paint. Allow to dry thoroughly.

The wheat is deceptively easy to paint. You will need a warm yellow such as yellow oxide and white acrylic paint. With the yellow oxide draw in three or four lines that will be your stalks. Work on the left side first and still with the yellow oxide draw in little almond shapes, with the curve touching the stalk and the peak pointing away. Do six or seven of these down the left side of each stalk.

Mix a little white with the yellow oxide so that you have a lighter shade. It doesn't have to be mixed very well, having streaks of white and yellow give a more natural appearance. Draw the same almond shape but on the right hand side of the stalk now. Lastly finish with a few long wispy lines coming out from the middle of the almond shape. See how easy that was!